En-8
1-888-514-1663
|
WWW.OUTLANDLIVING.COM
SECTION 3:
SET UP INSPECTION
SEQUENCE
The Vertical Garden should be inspected before use and at least
annually. More frequent cleaning and/or adjustments may be
required as necessary.
Prior to each use:
• Ensure placement is on a level and firm surface able to hold the
fully loaded weight of the frame, which is approximately
55-70Kg (120-150lb).
• Ensure no parts are missing and all fasteners are firmly
tightened.
SECTION 2:
PLANTER GARDENING
(continued)
SECTION 4:
MAINTENANCE
Your Outland Vertical Garden is meant for indoor or outdoor use
and requires periodic maintenance to keep it in good condition.
• Should any part of this appliance become soiled or dirty, wipe
down with a damp wet cloth. Use only water based cleaners.
• Check fasteners and ensure firmly tightened.
IMPORTANT: Do not use petroleum based, flammable or
corrosive cleaning products on or near this unit.
This appliance is NOT a toy.
WARNING:
Do not climb on the Vertical Garden or use it as a ladder or
serious injury, property damage and/or death may occur.
1” WATER RESERVOIR
To create a 1” water reservoir:
Option A:
Drill a 5/16” (8mm) sized hole approximately 1-1/8 inch
up from the bottom of the bin, on the front face of the bin.
Option B:
Drill a 5/16” (8mm) sized hole on the top of one of the
raised features located on the bottom of the planter bins.
If you require drainage but not a 1” water reservoir, simply drill a
5/16” (8mm) sized hole on the bottom of the planter bins.
Attention:
Before drilling holes in the bins, consider that pesky
water may drip on the ground. TIP: Silicone tubing may be used to
direct the flow of water. (Silicone tubing not included.)
IMPORTANT
• Always ensure your Vertical Garden stands straight and level.
IMPORTANT
• Always ensure
all fasteners are
firmly tightened.
