FMI DVC36B Скачать руководство пользователя

Страница: 1 / 20

For more information, visit www.fmiproducts.com

Installation and service must be performed by a quali-

fied installer, service agency or the gas supplier.

WARNING: Improper installation, adjustment, altera

tion, service or maintenance can cause injury or prop

erty damage. Refer to this manual for correct installation
and operational procedures. For assistance or addi

tional information consult a qualified installer, service
agency or the gas supplier.

This appliance may be installed in an aftermarket,* per

manently located, manufactured (mobile) home, where
not prohibited by local codes.

* Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer

State of Massachusetts: The installation must be made
by a licensed plumber or gas fitter in the Commonwealth
of Massachusetts.

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

DIRECT-VENT CHASSIS

OWNER’S INSTALLATION INSTRUCTIONS

MODELS (V)DVC36(B)(H) AND (V)DVC42(B)(H)

FOR USE WITH DVM SERIES BURNER MODULES

Patent Pending

PFS

Содержание DVC36B





















Результаты поиска

Содержание DVC36B

Отзывы:

Похожие инструкции для DVC36B

Бренды по названию

Популярные бренды

FMI DVC36B, Руководство по установке для владельца

Результаты поиска

Содержание DVC36B

Отзывы:

Похожие инструкции для DVC36B

Бренды по названию

Популярные бренды