www.fmiproducts.com
125192-01B
2
TABLE OF CONTENTS
Safety .................................................................. 2
Specifications
...................................................... 3
Fireplace Installation
............................................ 3
Venting Installation
.............................................. 6
Optional Gas Line Installation
............................ 13
Finishing Fireplace
............................................ 15
Operation and Maintenance Guidelines
............ 15
Replacement Parts
............................................ 17
Technical Service
............................................... 17
Parts
.................................................................. 17
Accessories
....................................................... 18
SAFETY
CAUTION: The structural
integrity of the mobile home
floor and ceiling/roof must be
maintained.
WARNING: Do not install a
fireplace insert in this box unless
the manufacturer's instructions
with the insert specifically state
this fireplace has been tested for
use with the insert.
FOR YOUR SAFETY
• Do not store or use gasoline
or any other flammable vapors
or liquids in the vicinity of this
or any other appliance.
• Due to high temperatures, the
appliance should be located
out of traffic and away from
furniture and draperies.
• Do not place clothing or other
flammable materials on or near
the appliance.
• Never leave children unat
-
tended when a fire is burning
in the fireplace.
This fireplace is not intended to
be used as a substitute for a fur-
nace to heat an entire home. Use
for supplemental heat only.
This wood burning fireplace
complies with the UL 127 stan-
dard as a FACTORY BUILT FIRE-
PLACE and is listed and tested
by the PFS Corporation.
WARNING: Improper instal-
lation, adjustment, alteration,
service or maintenance can
cause injury, property damage or
loss of life. Refer to this manual
for assistance or additional in-
formation. Consult a qualified
installer or local distributor.
IMPORTANT: Check HUD re-
quirements before installing this
fireplace.
The 36EMW Series is specifically designed
for use in manufactured mobile homes. These
fireplaces include a combustion air kit and
bi-fold doors.
Before beginning the installation of the
fireplace, read these instructions through
completely.
• This FMI PRODUCTS, LLC fireplace and
its components are safe when installed
according to this installation manual.
Unless you use FMI PRODUCTS, LLC
approved components, which have been
designed and tested for the fireplace
system, you may cause a fire hazard.
• The FMI PRODUCTS, LLC warranty will
be voided by and FMI PRODUCTS, LLC
disclaims any responsibility for the follow
-
ing actions.
a. Modification of the fireplace, com
-
ponents, doors, air inlet system and
damper control.
b. Use of any component part not manu
-
factured or approved by FMI PROD
-
UCTS, LLC in combination with a FMI
PRODUCTS, LLC fireplace system.
Proper installation is the most important step
in ensuring safe and continuous operation
of the fireplace. Consult the local building
codes as to the particular requirements
concerned with the installation of all factory
built fireplaces.
