BATTERIES:
A battery compartment door allows easy access to the 9 Volt battery that powers the device. One
alkaline 9 Volt "transistor" battery is used. If the unit will not power up the battery must be replaced by a fresh 9
Volt battery.
The battery is located in the case with access provided by a sliding plastic cover plate that has an arrow
printed on it. Slide in the direction of the arrow to open. When replacing the cover, place it flat into the grooves so
that both ends engage when closing.
ENCLOSURE:
The comfort grip hand-held case is made of flame retardant ABS plastic with a flame rating of 94-5VA.
The meter comes with an impact resistant rubber boot to protect it during daily use.
AUXILIARY EQUIPMENT:
The MC1, MC2, and MC3 are Protective Carry Cases to house and protect the HDFM-1 and your other test
meters while being transported. These are very rugged water resistant ABS cases with foam-lined interiors suitable
for transporting this meter and other test equipment. You can order these carry cases as an option.
* 1080PsF is a high definition video format that has 1080 lines of vertical resolution using a Progressive Segmented
Frame. The frame is sub-divided into two fields. One field is for the odd numbered lines and the other is for the
even numbered lines. This format appears like an interlaced 1080i signal and this meter reads it as 1080i.
HDFM-1isb
PAGE 5 OF 5
