FLYWOO Firefly 1S Nano Baby ANALOG V1.0
Driver software:
https://impulserc.blob.core.windows.net/utilities/ImpulseRC_Driver_Fixer.exe
3/ Then load the local HEX firmware and wait for the flashing to complete. A green
progress bar is displayed to indicate completion, and DFU will become a COM port
4/ After the connection is entered, it is a blank interface, you need to write CLI
commands, Factory CLI LINK:
https://flywoo.net/pages/manual
*Please do not try to update the ESC firmware. It will cause the ESC to burn out and
cannot be repaired.
**Default ESC firmware: O_H_5_REV16_8-48K
