flyWithCE Flight Recorder Quick Start Guide
Copyright © flyWithCE 2015 - 2018
2
Before flight
Enter flight declarations
To enter flight declarations follow this procedure:
1.
Turn on flyWithCE Flight Recorder.
2.
Connect device to USB port on your PC.
3.
Make sure that you are connected to the Internet.
4.
Run flyWithCE Logbook.
5.
Check that there is Online status in the bottom left corner.
6.
Press Connect button.
7.
Press Declare button.
8.
Enter Pilot, Plane, Airport and Task information.
9.
Press Declare button to close the dialog.
Important: Make sure that you are connected to the Internet when you are entering flight
declarations. flyWithCE Logbook will update flight declaration information on flyWithCE server.
This declaration will be then used for signed flights.
Prepare device for next flight
Before each flight please:
1.
Make sure that there is enough room in the flyWithCE Flight Recorder memory for
next flight. To check how much time is left open Options dialog by selecting File –
Options menu option. Time is displayed on Recorder tab in the Flight recorder
memory section. If there is not enough space press Erase button, which will delete
the contents of the flyWithCE Flight Recorder memory.
2.
Fully charge flyWithCE Flight Recorder battery by turning off the device and
connecting device to USB port (PC or AC charger). During charging green LED will be
turned on. Device is fully charged when green LED is turned off.
