FlyTek ECO-ZIP, Руководство по эксплуатации и обслуживанию

Страница: 20 / 22

PROBLEM POSSIBLE CAUSE SOLUTION
Insufficient or impossible
coffee brewing
Empty water tank Fill the tank (page 16).
Grinding too fine Use a new pod. Contact
coffee pod Supplier.
Brewed coffees are cold Cold ceramic cups Preheat the cups with hot
water or use disposable
cups.
Faulty heating system Contact the Supplier.
Pump makes too much
noise and does not allow
coffee brewing
The pump sucked in air Fill the tank (page 16) and
repeatedly press the manual
coffee dispensing switch
(switch 2 of the panel ref. D)
until the pump is correctly
triggered.
The “cream” is not enough
or missing at all
Grinding too coarse Use a new pod. Contact
coffee pod Supplier.
Coffee not fresh Use a new pod. Contact
coffee pod Supplier.
Water has been in the tank
for many days
Replace the water in the
tank paying attention to its
correct re-insertion.
20