FLYSURFER BOOST4, Руководство пользователя, Страница: 9 / 18

EN
GL
ISH
9
LAU
NC
Hi
NG
05 LAUNCHiNG
Please check not only the wind and weather conditions, but
also all your equipment, especially the safety system befo-
re launching. Do not use any kite outside of its recommended
upper wind range. When launching in strong winds, we recom-
mend that you have an assistant holding you from the back of
your harness. During launching, always pay attention that your
brilde lines do not get caught on anything or become tangled.
05.01 Wind window edge with helper
on the L.E.i kite
It is important that your helper is experienced with this tech-
nique and you have explained them how it‘s done. Position the
kite and helper exactly on the edge of the window.
Pick up the bar and signal the starting helper that he can rai-
se the kite in a C-shape with the front tube facing the windward
side. Make sure all lines are clear and your helper is in the right
position. If you feel a steady pull in the kite, give the helper the
sign to let go.
Note: Get aligned with the wind, the helper retains his position
and is not moving around.
Start at the leading edge and sort the bridle lines. Then con-
nect your front lines with a larkshead at the end of the bridle line
as shown in the picture. Attach your colored backlines with a lar-
kshead with the colored pigtail to the tip of the kite.
Line A
ttachment