Flyron Technology Limited
PIR Motion Sensor Activated Audio Player(FNP-702A)
E-mail: [email protected]
7
2). Long press key B till the indicator light flashes. It means you successfully chose mode B.
3). Long press key A and key B simultaneously till the indicator light flashes. It means you
chose mode C successfully.
6. FAQ
Question1:
Can this product support to play WAV file ?If not ,how should we do ?
A
:It only supports MP3 file, and can not support to play WAV,but can convert the WAV file to MP3 through the
following operations, then use it .
Method1:Install an audio playback software which has MP3 encoding and decoding functions,convert WAV format
to MP3 file .
Method 2: Search the MP3 file you need on the internet.
Question 2
: When using this product, I found that it just played half of the voice and stopped. After a short while, it
continued to play. Like this over and over again. What's the problem ?
A
: It's a power shortage problem caused by the battery. The problem will be solved after you recharge the battery.
Question 3
: After power on, there is a time no response or reaction or insensitive, there are delays and so on.
What does it happen?
A
: When the sensor circuit is powered on, there will be 5-15 seconds to activate the sensors, in order to prevent
the spurious triggering or destroying caused by instable voltage. During this time, no induction or very slow
reaction is normal, it will back to normal after this period of time.
Question 4
: During updating audio files, sometimes I need to wait very long. what’s the problem?
A
:When updating audio files last time, you switched off the power before the updating finished, then the flash
memory of the device was caused some errors. When you update audio files again, the flash memory would be
re-formatted, so time would last longer.
