Flyron Technology Co., Ltd.
www.flyrontech.com
-page
4
-
3). Copy your MP3 files from local disk into the folder “00” on the USB stick. Refer to the image below.
4). Remove the USB stick from computer safely.
5). Power on the player, and insert the USB stick, and you’ll see the LED light starts blinking, which indicates the player is
automatically copying the MP3 files into the internal memory.
6). Once the LED light stops blinking and you hear the “beep” twice, it means the copying / updating is finished, and now
you can pull out the USB stick.
7). Re-power on the player, it’ll work normally with the new MP3 files on the internal memory.
Note
You can load one file or multiple files into the player, but the total size can’t be larger than the internal memory (4Mbytes),
otherwise the update will fail.
Mode Selection
This product supports two work modes. Users can choose the right mode according to the actual requirements through
pressing the button “MODE” shortly. After pressing the button, the LED light will start blinking immesiately. After a few
