![Flyron Technology FN-AL6P Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/flyron-technology/fn-al6p/fn-al6p_user-manual_2312230003.webp)
Flyron Technology Co., Ltd.
FN-AL6P Multifunctional MP3 Player
E-mail: [email protected]
3
playback will be stopped/cancelled. Once the button is kept holding, when the playback of the audio file
is finished, it will start to play it repeatedly(loop playback).
Pulse Non-interruptible: In this mode, a single negative pulse will start playback
.
It's not possible to
interrupt the playback by pressing the same button or the other buttons. Once an audio file is triggered,
the audio file will not be able to be interrupted/cancelled during playback. The playback will only end
when the audio file has played its entirety.
Hold and Play Once: In this mode, the negative pulse must be held/maintained to the sound module trigger
for audio file to complete. The audio file will only playback while button, or negative pulse, is
held/maintained during playback. Once the button being held, or negative pulse, is removed, the
playback will be stopped/canceled. Once the button is kept holding, when the playback of the audio file
is finished, it will not start to play it again.
All in Loop: In this mode, a single negative pulse will start playback
.
Press the button and it’s able to play
all the audio files in the storage device one by one in loop. During playback, if the the same button is
pressed again, the playback will be stopped. In addition, if the associated trigger input is shortened with
GND first, the player will automatically play the audio files one by one in loop once it is powered on.
Play Next in Associated Folder: In this mode, a single negative pulse will start playback
.
Every time press
the button and it’s able to play next audio file and stops when the audio file is finished in the associated
folder. During playback, if the the same button is pressed again, the playback will be interrupted and it
will activate the next audio file at the same time. In this mode, as many as 100 audio files can be loaded
into the folder.
Single in Loop: In this mode, a single negative pulse will start playback
.
Press the button and it’s able to
play the associated audio file in loop. During playback, if the the same button is pressed again, the
playback will be stopped.
Any of these 12 work modes can be set for any of the 6 trigger inputs through a configuration file named “read.cfg”, which comes
from a text file(.txt) originally. In the configuration file, each digit that represents the work mode is associated with one trigger input,
so there are total of 6 digits that associate 6 trigger inputs respectively. Please refer to the two steps below on how to build a
configuration file successfully.
1). Build a new text file on computer and enter the corresponding number like “001133” that represents the input 1 and input 2 will
be set with the trigger mode “Pulse Interruptible”, input 3 and input 4 will be set with the trigger mode “Hold and Play in Loop” ,
input 5 and input 6 will be set with the trigger mode “Hold and Play Once”. Refer to the image below.
For input 6
For input 1