Blow Tube & Shoulder Harness Assembly
A
Blow Tube Assembly
1. Attach the blow tube to the product as shown in
Fig
A
, ensuring it clicks securely into position.
Shoulder Harness Assembly
1. Attach the Shoulder Harness to the product as illustrated in
Fig B
.
2. Adjust the Shoulder Harness as required to ensure it is in
the most comfortable position.
(C)
.
B
C
Suction Tube Assembly
F1
F2
F3
1. Turn the product over and press the release catch on
the Blow Tube
(E1)
.
2. Slide the catch away from the product
(E2)
and re-
move the Blow Tube from the product
(E3)
.
E1
D
Converting from Blower to Suction
E2
E3
Suction Tube Assembly
1. Attach the two Suction Tube halves together as illus-
trated in
Pic D
. Ensure that the two halves click se-
curely into position.
IMPORTANT
When the Suction Tube halves are attached together,
this is a permanent fixture, they can not be disassem-
bled.
3. Press the release catch on the Impeller Guard
(F1)
.
4. Release the wire hook
(F2)
.
5. Turn the Impeller Guard anti-clockwise until it can be
removed
(F3)
.