Flymo Turbo Lite 250, Оригинальное руководство пользователя, Страница: 8 / 12

HOW TO USE
1. Start mowing the edge of the lawn nearest to the
power point so the cable is laid out on the lawn you
have already cut. (J)
2. Cut your grass twice a week during the growing
season. Your lawn will suffer if more than a third of its
length is cut at one time.
CAUTION! Do not overload your mower.
Mowing long thick grass may cause the motor speed to
drop. You will hear a change in the motor sound. If the
motor speed drops, you may overload your lawnmower
which may cause damage. When mowing in long thick
grass, a first cut with the cutting height set higher will help
reduce the load. See “Adjusting the Cutting Height”.
CARING FOR YOUR PRODUCT
Cleaning (P)
NOTE: Use gloves.
It is very important that you keep your lawnmower clean.
Grass clippings left in any of the air intakes or under the
hood could become a potential fire hazard.
1. Remove grass from under the hood with spanner/
scraper tool.
2. Using a soft brush, remove grass clippings from all air
intakes.
3. Remove the blade to gain access to the fan and clean
with a soft brush.
4. Wipe over the surface of your lawnmower with a dry
cloth.
IMPORTANT: Never use water for cleaning your
lawnmower. Do not clean with chemicals, including
petrol, or solvents. Some can destroy critical plastic
parts.
At the End of the Mowing Season
1. Replace blade, bolts, nuts or screws, if necessary.
2. Clean your lawnmower thoroughly.
3.
Ask your local Service Centre to clean the air filter
thoroughly and carry out any service or repairs
required.
4. Make sure that the electric cable is coiled properly.
Carrying your Lawnmower
Ensure the blade is facing away from you.
Storing your Lawnmower
Store in a dry place where your lawnmower is protected
from damage.
TROUBLESHOOTING
Fails to Operate
• Is the power turned on?
• Check the fuse in the plug. Replace if blown.
• Fuse continues to blow? Immediately disconnect from
the mains electricity supply and consult your local
approved Service Centre
• Is the correct starting procedure being followed?
Poor Flotation
• Disconnect from the mains electricity supply.
• Clean the underside of the hood and the fan blades.
• Raise to a higher height of cut. See “Adjusting the
Cutting Height”.
• If poor flotation persists? Disconnect from the mains
electricity supply and consult your local approved
Service Centre.
Excessive Vibration
NOTE: Disconnect from the mains electricity supply.
• Replace broken or missing plastic cutters.
•
Check plastic cutters are fitted correctly.
• If vibration persists? Immediately disconnect from the
mains electricity supply and consult your local approved
Service Centre.
SERVICE RECOMMENDATIONS
• Your product is uniquely identified by a silver and black
product rating label.
• We strongly recommend that your product is serviced at
least every twelve months, preferably by a professional.
ENVIRONMENTAL INFORMATION
Husqvarna UK Ltd. products are manufactured under
an Environmental Management System (ISO 14001)
using, where practical, components manufactured in the
most environmentally responsible manner, according to
company procedures, and with the potential for recycling
at the end of the products’ life.
• Packaging is recyclable and plastic components have
been labelled (where practical) for categorised recycling.
• Awareness of the environment must be considered
when disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for disposal
information.
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product.
For more detailed information about recycling of this
product, please contact your local council office, your
household waste disposal service or the shop where you
purchased the product.
8