5
6
4
7
5
8
9
1. Depress both locking buttons
4
and remove the battery
5
from the battery holder
6
on the handle.
2. Plug the plug of the charger cable
7
into the battery
5
.
3. Plug battery charger
8
into a mains socket.
Charging indicator lamp
9
at the charger unit is lit red:
Battery is being charged.
Charging indicator lamp
9
at the charger unit is lit green:
Battery is fully charged.
(For charging time, see 9. Technical Data.)
4. First remove the charging cable
7
from the charging socket
5
and then unplug the battery charger
8
from the mains socket.
5. Slide battery
5
onto the battery holder
6
on the handle until it
audibly engages.
Avoid exhaustive discharge:
Avoid exhaustive discharge: Do not wait until the blade comes
to an absolute stop (batterytotally discharged) as this shortens
the battery life.
v
If the output of the hedge trimmer decreases
noticeably,charge the battery.
If the battery has been totally discharged, the LED
9
will flash
at thestart of charging. If the LED
9
is still flashing after an hour,
a faulthas occurred (see 8. Troubleshooting).
5. Operation
Working positions:
The hedge trimmer can be operated in 4 working positions
(illustration similar).
Side trimming:
Telescopic pipe
retracted
Vertical trimming
at high level:
Telescopic tube
extended
Horizontal trimming
at high level:
Motor unit tilted
by 75°, telescopic
pipe extended
Trimming at low
level:
Motor unit tilted
by – 60°, telescopic
pipe extended
6
5871192-01_9672988-01.indd 6
12.06.14 10:08