Flymo RE 32, Важная информация

Страница: 10 / 12

ENGLISH - 5
Guarantee and Guarantee Policy
If any part is found to be defective due to faulty
manufacture within two years of original
purchase, Electrolux Outdoor Products, through
its Authorised Service Repairers will effect the
repair or replacement to the customer free of
charge providing:
(a) The fault is reported directly to the
Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or
faulty adjustment by the user.
(d) The failure has not occurred through fair
wear and tear.
(e) The machine has not been serviced or
repaired, taken apart or tampered with by
any person not authorised by Electrolux
Outdoor Products.
(f) The machine has not been used for hire.
(g) The machine is owned by the original
purchaser.
(h) The machine has not been used outside of
the country for which it was specified.
(i) The machine has not been used
commercially.
* This guarantee is additional to, and in no
way diminishes the customers statutory
rights.
Failures due to the following are not covered,
therefore it is important that you read the
instructions contained in this Operator's Manual
and understand how to operate and maintain
your machine:
Failures not covered by guarantee
* Replacing worn or damaged blades.
* Failures as a result of not reporting an initial
fault.
* Failures as a result of sudden impact.
* Failures as a result of not using the product
in accordance with the instructions and
recommendations contained in this
Operator's Manual.
* Machines used for hire are not covered by
this guarantee.
* The following items listed are considered as
wearing parts and their life is dependent on
regular maintenance and are, therefore not
normally subject to a valid warranty claim:
Blades, Electric Mains cable.
* Caution!
Electrolux Outdoor Products does not accept
liability under the warranty for defects
caused in whole or part, directly or indirectly
by the fitting of replacement parts or
additional parts that are not either
manufactured or approved by Electrolux
Outdoor Products, or by the machine having
been modified in any way
Fault Finding Hints
Fails to Operate
1. Is the correct Starting procedure being
followed? See ‘To Start your Lawnmower’
2. Is the Power Turned On?
3. Check the fuse in the plug, if blown replace.
4. Fuse continues to blow?
Immediately disconnect from the mains
electricity supply and consult your local
approved Service Centre.
Poor Grass Collection
1. Disconnect from the mains electricity supply.
2. Clean the outside of the air intakes, the
discharge chute and the underside of the
deck
.
3. Raise to a higher height of cut. See
Adjusting the Cutting Height
4. Clean Fan Blades.
5. If poor collection persists.
Immediately disconnect from the mains
electricity supply and consult your local
approved Service Centre.
Excessive Vibration
1. Disconnect from the mains electricity supply.
2. Check that the blade is fitted correctly?
3. If the blade is damaged or worn, replace it
with a new one.
4. If vibration persists, turn the blade through
180o by first loosening the blade bolt, turning
the blade and re-tightening the blade bolt.
5. If vibration persists?
Immediately disconnect from the mains
electricity supply and consult your local
approved Service Centre.
Lawnmower becomes heavy to push
1. Disconnect from the mains electricity supply.
2. In long grass or uneven ground, the height of
cut should be raised to a higher position.
See Adjusting the Cutting Height
3. Check that the wheels and rollers can rotate
freely.
4. If problem persists?
Immediately disconnect from the mains
electricity supply and consult your local
approved Service Centre.