background image

5788557-01

EC Declaration of Conformity

Husqvarna AB, 561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation.........................................Hedge Trimmer 
Designation of Type............................ECC42/ECC50
Identification of Series........................See Product Rating Label
Year of Construction...........................See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC,  2004/108/EC,  2000/14/EC
based on the following EU harmonized standards applied:
EN60745-1, EN60745-2-15, EN50366, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3

The maximum A weighted sound pressure level L

pA

at the work station, measured according to EN60745-2-15, corre-

sponds to the Level given in the table.

The maximum hand / arm vibration weighted value, measured according to EN60745-2-15, on a sample of the above
product(s) corresponds to the Value a

h

given in the table.

The declared vibration total value has been measured in accordance with a standard test method and may be used for
comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning:
The vibration emission during actual use of the power tool can differ from the declared total value depending on the
ways in which the tool is used.
Operators should identify safety measures to protect themselves that are based on an estimation of exposure in the ac-
tual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off
and when it is running idle in addition to the trigger time).
2000/14/EC: The Measured Sound Power L

WA

& Guaranteed Sound Power L

WA

values are according to the tabulated figures.

Conformity Assessment Procedure...............

Annex V

Notified Body.................................................

Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England

Newton Aycliffe  15/12/2011
P. Lameli
Global R&D Director - Hand held
Keeper of technical documentation

Type

Blade length (cm)

Measured Sound Power L

WA

(dB(A))

Guaranteed Sound Power L

WA

(dB(A))

Level L

pA

(dB(A))

Uncertainty K

pA

(dB(A))

Value a

h

(m/s

2

)

Uncertainty K

ah

(m/s

2

)

Weight (Kg)
Battery
Battery type

Battery capacity (Ah)

Battery charging time (hrs)

Idling time (mins - with full battery)

Battery Charger
Mains voltage

Rated output current (mA)

Max. output voltage  V (dc)

ECC42

42

82

85

71.3

3.1

0.9

1.5

2.67

NiMH 18V

1.6

approx 3

approx 60

230 V/50 Hz

600

21.6

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.

Copyright © 2011 Flymo S.A. All rights reserved.  Flymo® and other product and feature names are registered or unregistered trademarks

of Flymo S.A.

Husqvarna AB

561 82

Huskvarna

Sweden

ECC50

50

84

88

73.4

3.2

1.1

1.5

2.86

NiMH 24V

1.6

approx 3

approx 60

230 V/50 Hz

600

28.8

Содержание MULTIMO 420









Отзывы: