Flymo Mini Trim Auto Скачать руководство пользователя страница 10

Страница: 10 / 15

MAINTENANCE

Caring for your Mini-Trim Auto

•

WARNING
Disconnect from the mains
electricity supply, before
attempting any maintenance or
adjustment. Cutting head
continues to rotate after the
trimmer has been switched off.

Keep fingers and hands clear of
the line cutter on leading edge of
guard.

After you have finished using your
Flymo Trimmer follow the procedure
below:
1. Disconnect from the mains

electricity supply

2. Never clean your trimmer with

water, cleaning fluids, or solvents,
just remove debris with a suitable
tool, a soft brush or dry cloth.

3. Using the scraper provided, clean

around the inside of the cutting
head housing to remove any grass
and debris. (Fig M)

4. Using a soft brush, clean around the

inside of the cutting head housing
(Fig N), the cutting head (Fig P)
and the motor housing air vents.(Fig
Q)

5. Inspect the trimmer carefully,

especially the parts of the cutting
head.

6. If your trimmer is damaged in any

way contact your local Electrolux
Outdoor Products approved service
centre.

•

Never use a damaged trimmer.

7. Wind cable carefully to avoid

kinking.

8. Store in a cool, dry place and out of

reach of children.

Содержание Mini Trim Auto
















Результаты поиска

Содержание Mini Trim Auto

Отзывы:

Похожие инструкции для Mini Trim Auto

Бренды по названию

Популярные бренды

Flymo Mini Trim Auto, Инструкция по эксплуатации

Результаты поиска

Содержание Mini Trim Auto

Отзывы:

Похожие инструкции для Mini Trim Auto

Бренды по названию

Популярные бренды