Flymo MC300, Руководство пользователя

Страница: 9 / 12

How to Mow cont...
Remember : for best grass collection, always
mow in a straight line, do not swing the
lawnmower from side to side
Note : If a trail of grass is left by your lawnmower this
indicates that your cutting height needs to be raised
or the grassbox is full. If the grassbox is full, empty is
as described in "Removing and emptying the
grassbox". Fit the grassbox, start the lawnmower and
mow over the grass trail to collect any residual grass.
Adjusting the Cutting Height
N1 - Blade bolt
N2 - Blade
N3 - Cutting height spacers (MAXIMUM 3)
N4 - Fan
•
Always handle the blade with care - sharp
edges could cause injury.
• USE GLOVES.
• Never use more than 3 Cutting Height
Spacers.
• Spacers must only be fitted between the
blade and the fan and NEVER between the
blade and the bolt.
1. Remove the blade bolt, and blade as
described in
Removing the Blade and Fan.
2. For a Lower Cut - Add spacers to a
maximum of 3. (N)
3.
For a Higher Cut
- Take spacers away.
4. Refit the blade as described in Fitting the
Blade and Fan.
Removing the Blade and Fan
1. To remove the blade bolt, hold the fan firmly
and with the spanner provided loosen the
blade bolt by turning it anti-clockwise
(P) .
2. Remove the blade bolt, blade, spacers, fan
and insert.
(P)
3. Inspect for damage and clean as necessary.
• Renew your metal blade after 50 hours
mowing or 2 years whichever is the sooner
- regardless of condition.
Fitting the Blade and Fan
• If the blade is cracked or damaged replace
it with a new one.
• Never use a blade bolt if the insulated
head is damaged cracked or missing.
1. Ensure the insert and fan are located
correctly.
(P)
2. Place the spacers onto the fan ensuring the
peg have located into the holes.
(P)
3. Place the blade onto the spacers ensuring
the pegs have located into the holes on the
blade and ensuring the blade is positioned as
illustrated in
Figure P .
4. Place the blade bolt through the centre hole of
the blade.
(P)
5. Tighten down clockwise by hand.
6. Hold the fan firmly and tighten the blade bolt
with the spanner provided.
(P)
Caring for your Lawnmower
Cleaning (Q) - USE GLOVES
IMPORTANT:
It is very important that you keep
your lawnmower clean. Grass clippings left in any
of the air intakes or under the hood could become
a potential fire hazard.
1.
Remove grass from under the hood with a
piece of wood or similar.
2. Using a soft brush - remove grass clippings
from all air intakes and the grassbox.
3. Remove the blade, see Figure P , to gain
access to the fan and clean with a soft brush.
4. Wipe over the surface of your lawnmower with
a dry cloth.
IMPORTANT: Never use water for cleaning your lawn-
mower. Do not clean with chemicals, including petrol,
or solvents - some can destroy critical plastic parts.
At the End of the Mowing Season
1. Replace blade, bolts, nuts or screws, if
necessary.
2. Clean your lawnmower thoroughly.
3. Ask your local Service Centre to clean the air
filter thoroughly and carry out any service or
repairs required.
4. Make sure that the electric cable is coiled
properly.
Carrying your Lawnmower (R)
Hold as illustrated in Figure R. Ensure the blade is
facing away from you.
Storing your Lawnmower (S)
Store in a dry place where your lawnmower is
protected from damage.
Service Recommendations
• Your product is uniquely identified by a silver and black product rating label.
• We strongly recommend that your product is serviced at least every twelve months, more
often in a professional application.
ENGLISH - 4