5100449-03
If any part is found to be defective due to faulty manufacture within
the guarantee period, Husqvarna UK Ltd., through its Authorised
Service Repairers will effect the repair or replacement to the
customer free of charge providing:
(a)
The fault is reported directly to the Authorised Repairer.
(b)
Proof of purchase is provided.
(c)
The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d)
The failure has not occurred through fair wear and tear.
(e)
The machine has not been serviced or repaired, taken apart
or tampered with by any person not authorised by Husqvarna
UK Ltd..
(f)
The machine has not been used for hire.
(g)
The machine is owned by the original purchaser.
(h)
The machine has not been used outside of the country for
which it was specified.
(i)
The machine has not been used commercially.
*
This guarantee is additional to, and in no way diminishes the
customers statutory rights.
Failures due to the following are not covered, therefore it is important that
you read the instructions contained in this Operator's Manual and
understand how to operate and maintain your machine:
Failures not covered by guarantee
*
Replacing Nylon Line.
*
Failures as a result of not reporting an initial fault.
*
Failures as a result of sudden impact.
*
Failures as a result of not using the product in accordance with
the instructions and recommendations contained in this
Operator's Manual.
*
Machines used for hire are not covered by this guarantee.
*
The following items listed are considered as wearing parts and their life
is dependent on regular maintenance and are, therefore not normally
subject to a valid warranty claim: Nylon Line., Spool & Line
*
Caution!
Husqvarna UK Ltd. does not accept liability under the warranty for
defects caused in whole or part, directly or indirectly by the fitting of
replacement parts or additional parts that are not either
manufactured or approved by Husqvarna UK Ltd., or by the
machine having been modified in any way.
Guarantee & Guarantee Policy
EC Declaration of Conformity
Husqvarna AB, 561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Category........................................ Battery Lawn Trimmer
Model(s)......................................... GTC24A
Identification of Series................... See Product Rating Label
Year of Construction...................... See Product Rating Label
Complies with the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC
based on the following EU harmonised standards applied:
EN60335-1, EN60335-2-91, EN60335-2-29, EN50366, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
pA
at the operator’s position, measured according to EN60335-2-91,
corresponds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 20643 on a sample of the above
product(s) corresponds to the Value a
h
given in the table.
2000/14/EC: The Measured Sound Power L
WA
& Guaranteed Sound Power L
WA
values are according to the tabulated
figures.
Conformity Assessment Procedure.................. Annex VI
Notified Body.................................................... Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
Newton Aycliffe, 25/08/2011
P. Lameli
Global R & D Director - Hand held
Keeper of Technical documentation
GCT24A
25
10,000
89
93
75.6
2.5
1.87
1.5
6.89
Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (RPM)
Measured Sound Power L
WA
(dB(A))
Guaranteed Sound Power L
WA
(dB(A))
Level
L
pA
(dB(A))
Uncertainty
K
pA
(dB(A))
Value
a
h
(m/s
2
)
Uncertainty
K
ah
(m/s
2
)
Weight (Kg)
Husqvarna AB
561 82
Huskvarna
Sweden
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2011 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
of Flymo S.A.
