Flymo EasiTrim 250, Руководство оператора

Страница: 7 / 14

7
Only use original FLYMO Spool and Line. You can order Replace-
ment Spool and Line from your FLYMO dealer or directly from the
FLYMO Customer Service.
• FLYMO Spool and Line
Art. FLY047 / 599431990
1. Release the spool cover
(16)
by pressing both locking clips
(17)
and
remove the cover.
2. Remove the spool (18) .
3. Clean the automatic lever
(19)
. The automatic lever
(19)
must move freely.
4. Feed the trimmer line
(8)
of the new spool
(18)
through the hole
(20)
and
pull out about 10 cm.
5. Insert the spool
(18)
. Do not trap the trimmer line
(8)
when you do this.
6. Fit the spool cover
(16)
so that both locking clips
(17)
audibly engage.
v
If the spool cover
(16)
cannot be touched down, turn the spool
(18)
to and
fro, until the spool
(18)
is completely in the spool holder.
The trimmer may only be used when the spool cover
(18)
is engaged.
To replace the trimmer line [ Fig. M4 ]:
Only use original FLYMO Trimmer line. You can order the replace-
ment trimmer line from your FLYMO dealer or directly from the
FLYMO Customer Service.
• FLYMO Trimmer Line
Art. NLO011 / 577616311
1. Remove the spool
(18)
(see 4. MAINTENANCE To replace the spool
and line).
2. Remove the rest of the trimmer line
(8)
.
3. Clean the spool
(18)
and the automatic lever
(19)
. The automatic lever
(19)
must move freely.
4. Take approximately 10 m of the new trimmer line
(8)
and insert 15 mm
of the trimmer line
(8)
into the hole in the spool
(18)
.
5. Wind the trimmer line (8) in the direction of the arrows on the top of the
spool
(18)
. Make sure that the trimmer line
(8)
is neatly coiled on the
spool (18) . (Failure to do so will impair the efficiency of the automatic
trimmer line extension).
6. Leave approximately 10 cm of the trimmer line
(8)
unwound and push it
into the cleat
(20)
.
7. Insert the spool
(18)
again (see 4. MAINTENANCE To replace the spool
and line).
To clean the battery and the battery charger:
Make sure that the surface and the contacts of the battery and the
battery charger always are clean and dry before you connect the
battery charger.
Do not use running water.
v
Battery charger: Clean the contacts and the plastic parts with a soft
and dry cloth.
v
Battery: Occasionally clean the ventilation slots and the terminals on
the battery using a soft brush that is clean and dry.
5. STORAGE
To put into storage:
The product must be stored away from children.
1. Remove the battery.
2. Charge the battery.
3. Clean the trimmer, the battery and the battery charger
(see 4. MAINTENANCE).
4. Store the trimmer, the battery and the battery charger in a dry,
enclosed and frost-free place.
Disposal:
(in accordance with RL2012/19/EC / S.I. 2013 No. 3113)
The product must not be disposed of to normal household
waste. It must be disposed of in line with local environmental
regulations.
IMPORTANT!
v
Dispose of the product through or via your municipal recycling
collection centre.
Disposal of the battery:
Li-ion
The FLYMO battery contains lithium-ion cells that should not be
disposed of with normal household waste at the end of its life.
IMPORTANT!
v
Dispose of the batteries through or via your municipal recycling
collection centre.
1. Discharge the lithium-ion cells completely (contact the FLYMO Service).
2. Protect the contacts on the lithium-ion cells against short circuits.
3. Dispose of the lithium-ion cells properly.
6. TROUBLESHOOTING
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v
Wait for the trimmer line to stop and remove the battery
before you troubleshoot the product.
To pull the trimmer line out of the spool manually
[ Fig. T1 ]:
A trimmer line
(8) that is too short or no longer extends automatically when
the trimmer is turned on can be pulled out manually.
v
Hold down the automatic lever
(19)
and pull the trimmer line
(8)
at the
same time.
To release retracted or welded trimmer line:
If the trimmer line
(8)
has disappeared into the spool
(18)
or if the automatic
trimmer line extension still doesn’t work after pulling the trimmer line (8) it
may be welded in the spool
(18)
.
1. Remove the spool
(18)
(see 4. MAINTENANCE To replace the trimmer
line).
2. Unwind the trimmer line
(8)
.
3. Clean the spool
(18)
, the automatic lever
(19)
and the trimmer line
(8)
.
The automatic lever (19) must move freely.
4. Wind the trimmer line
(8)
onto the spool
(18)
again
(see 4. MAINTENANCE To replace the trimmer line).
5. Insert the spool (18) again (see 4. MAINTENANCE To replace the spool).
Problem Possible Cause Remedy
Trimmer does not cut Trimmer line is worn or too
short.
v
Extend the trimmer line.
Trimmer line is empty.
v
Replace the spool or the
trimmer line.
Trimmer line is pulled into the
spool or welded.
v
Pull the trimmer line out of
the spool.
Trimmer line cannot be
extended or is used quickly
Trimmer line became too
dry and brittle (e. g. during
the winter).
v
Put the spool in water for
approx. 10 hours.
Trimmer line frequently
touched hard objects.
v
Prevent the trimmer line from
touching hard objects.
Automatic lever is dirty.
v
Clean the automatic lever.
Continuous clattering noise Too much trimmer line was
fed out.
v
Wind the trimmer line onto
the spool.
Trimmer line limiter is missing.
v
Contact the FLYMO Service.
Wheel stops turning Wheel is dirty.
v
Clean the wheel.
Trimmer can no longer
be stopped
Start lever is stuck.
v
Remove the battery and
loosen the start lever.
Trimmer does not start
or stops.
LED
(L1)
is flashing green
[ Fig. O4 ]
Battery is empty.
v
Charge the battery.
Trimmer does not start
or stops.
Error-LED
(Wp)
is illuminated
red [ Fig. O4 ]
Battery temperature is outside
the permissible temperature
range.
v
Wait until the battery tem­
perature is between
0 °C – + 45 °C again.
There are drops of water or
moisture between the battery
contacts on the trimmer.
v
Remove the water drops /
moisture with a dry cloth.
Engine is blocked.
v
Remove the obstacle.
Start again.
Trimmer does not start
or stops.
Error-LED
(Wp)
is flashing
red [ Fig. O4 ]
Product is defective.
v
Contact the FLYMO Service.
42250-85.960.01.indd 7 42250-85.960.01.indd 7 12.10.21 11:37 12.10.21 11:37