Flymo EasiStore 300R Li, Руководство пользователя

Страница: 7 / 10

IMPORTANT!
v
Dispose of the product through or via your municipal recycling
collection centre.
Disposal of the battery:
Li-ion
The FLYMO battery contains lithium-ion cells that should not be
disposed of with normal household waste at the end of its life.
IMPORTANT!
v
Dispose of the batteries through or via your municipal recycling
collection centre.
1. Discharge the lithium-ion cells completely (contact the FLYMO Service).
2. Protect the contacts on the lithium-ion cells against short circuits.
3. Dispose of the lithium-ion cells properly.
6. TROUBLESHOOTING
DANGER! Risk of injury!
Cut injury when the product starts accidentally.
v
Wait for the blade to stop, remove the battery, remove the
safety key and use gloves before you troubleshoot the product.
To replace the blade [ Fig. T1 ]:
DANGER! Risk of injury!
Cut injury when the blade turns and it is damaged,
bent, out of balance or has chipped edges.
v
Do not use the mower when the blade is damaged, bent,
out of balance or has chipped edges.
v
Do not regrind the blade.
The FLYMO spare parts are available from your FLYMO dealer or from the
FLYMO service.
Only use an original FLYMO blade:
• FLYMO replacement blade for 300R Li: Art. FLY 069
• FLYMO replacement blade for 340R Li: Art. FLY 087
1. Unscrew the blade bolt.
2. Remove the blade bolt and the washer.
3. Remove the blade and the spacer.
4. Put the spacer and the new blade on the mower.
5. Put the washer on the blade bolt.
6. Screw the new blade tight with the blade bolt.
Problem Possible Cause Remedy
Mower does not start Safety key is not in position I .
v
Turn the safety key to
position
I .
Battery is not put completely
into the battery holder.
v
Put the battery completely
into the battery holder until
it audibly engages.
Battery is empty.
v
Charge the battery.
Motor is blocked.
v
Remove the obstacle.
Start again.
Engine is jammed and
makes a noise Motor is blocked.
v
Remove the obstacle.
Start again.
Cutting height is too low.
v
Raise the cutting height.
Loud noises, the mower
is rattling Screws on engine, its fixing
or on the mower chasing are
loose.
v
Let the screws be tightened
by an authorised specialist
dealer or the FLYMO Service.
Mower runs unevenly or
vibrates strongly Blade is damaged / worn or the
blade mounting is released.
v
Replace the blade.
Blade is very dirty.
v
Clean the blade.
Lawn is not cleanly mowed Blade is blunt or damaged.
v
Replace the blade.
Cutting height is too low.
v
Raise the cutting height.
Red Error-LED on the battery
illuminates Battery temperature is out
of range.
v
Use the battery in surround-
ings where temperatures are
between 0 °C and 40 °C.
Problem Possible Cause Remedy
After pushing the button
no LED on the battery
illuminates Battery is defective.
v
Replace the battery.
After pushing the button
the LED on the battery
flashes red. Battery temperature is out
of range.
v
Use the battery in surround-
ings where temperatures are
between 0 °C and 40 °C.
Charging control lamp
on the charger does not
illuminate Battery charger or charging
cable are not connected
correctly.
v
Connect the battery charger
and charging cable correctly.
Charging control lamp on
the charger illuminates red Battery temperature is out
of range.
v
Use the battery in surround-
ings where temperatures are
between 0 °C and 40 °C.
Charging control lamp on
the charger flashes red Battery error / battery defective.
v
If the battery cannot be
reset by connecting it to
the charger, contact the
FLYMO Service.
NOTE: For any other malfunctions please contact the FLYMO Customer Service.
Repairs must only be done by FLYMO service departments or specialist dealers
approved by FLYMO.
7. TECHNICAL DATA
Battery Lawnmower
Unit Value
EasiStore 300R Li Value
EasiStore 340R Li
Speed of rotation cutting
blade
R/min 3500 3300
Cutting width cm 30 34
Cutting height adjustment mm
25 – 65
(3 positions) 20 – 60
(5 positions)
Volume of grass box l 30 35
Weight (without Battery) kg 8.0 10.4
Sound pressure level L
pA
1)
Uncertainty k
pA
dB (A)
84
3 83
3
Sound power level L
WA
2) :
measured / guaranteed
Uncertainty k
WA
dB (A)
88 / 90
1.88 86 / 89
2.17
Hand / arm vibration a
vhw
1)
m/s
2
< 2.5 < 2.5
Measuring process complying with: 1) EN 60335-2-77 2) RL 2000/14/EC
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of expo-
sure. The vibration emission value can vary during actual use of the electric power tool.
Battery B16-2025A
Unit Value ( Art. 967913201)
Battery voltage V (DC) 20
Battery capacity Ah 2,5
Number of cells (Li-Ion) 5
Battery charging time
(approx.)
min. 120
Lawn area per battery
charge (approx.)
m
2
250
Appropriate FLYMO System Batteries B16-2025A: Art. 967913201
Battery Charger 20 V Unit Value ( Art. 967913301)
Mains voltage V (AC) 120
Mains frequency Hz 50 – 60
Rated Power W 20
Output voltage V (DC) 20
Max. output current mA 1000
Appropriate FLYMO Battery Chargers 18 V: Art. 967913301
8. ACCESSORIES
FLYMO Replacement
Battery B16-2025A Battery for additional duration or
for replacement. Art. 967913201
FLYMO Battery Charger
20 V Charger to charge the FLYMO Batteries
B16-2025A Art. 967913301
7