background image

5108035-01

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.

I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,

NEWTON AYCLIFFE, 

Co. Durham.  DL5 6UP.

Certify that the product:-
Category

.....Electric Wheeled Lawnmower

Make

.............. Husqvarna Outdoor 

Products

Conforms to the specifications of Directive
2000/14/EC

I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,

NEWTON AYCLIFFE, 

Co. Durham.  DL5 6UP

Certify that  a sample of the above product has
been tested using directive 81/1051/EEC as a
guide.  The maximum A-weighted sound pres-
sure 

level

recorded at operator position under

free field semi anechoic chamber conditions
was :-

I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park,

NEWTON AYCLIFFE, 

Co. Durham.  DL5

6UP Certify that  a sample of the above
product has been tested using ISO 5349 as
a guide.  The maximum weighted root mean
square 

value

of vibration recorded at opera-

tor’s hand position was:-

Type of Cutting Device

...... Rotary Blade

Identification of Series

....... See Product Rating Label

Conformity Assessment Procedure

....ANNEX VI

Notified Body

..................... Intertek, Cleeve Road, Leatherhead,

Surrey. KT22 7SB  England

Other Directives:-

...............98/37/EC, 89/336/EEC, 2006/95/EC

& applicable standards:

-....EN61000-3-2, EN61000-3-3,

EN55014-1, EN55014-2, EN836, EN60335-1, EN60335-2-77,
EN50366

Type

....................................................VM032+   RM032    EMO32

Width of Cut

..........................................................32 cm

Speed of Rotation of Cutting Device

..................3400 RPM

Guaranteed sound power level

............................96 dB (A)

Measured Sound Power Level

.............................93 dB (A)

Level

.....................................................................80.2 dB (A)

Value

.....................................................................2.5 m/s

2

Weight

..................................................8.92 kg     8.42 kg    8.85 kg

Voltage/Hertz 

......................................................230V/50HZ

Power 

.....................................................1200W   1000W    900W

EC Declaration of Conformity

Husqvarna Outdoor Products

Aycliffe Industrial Park

NEWTON AYCLIFFE

Co.Durham  DL5 6UP

ENGLAND

Telephone - 0870 609 1901  Fax - 0870 609 1902

Newton Aycliffe, 15/02/2007
M. Bowden,
Research & Development Director

Содержание EASIMO EM032











Отзывы: