Flymaster Vario LS, Быстрый старт

Страница: 6 / 7

ENG
Basic operation:
8-Reset the Vario LS: Insert a paper clip into the
dedicated hole on the back of the vario LS. Do
not over press the clip and do not use any sharp
tip tool.
9 - Updating the Vario LS firmware
1 - Go to Flymaster website and under the
Downloads area, download the Designer
software.
2 - Install and run the Designer Software.
3 - With the Designer running , turn ON the
Vario LS. Connect it to your computer via the
supplied USB cable.
The Designer will detect the instrument, and if
there is any new firmware available, will prompt
you to install it in your Vario LS.
Functions:
OFF - Shutdown VarioLS
ALTI - Altimeters settings
CLTH - Vario climb Threshold
SKTH - Vario Sink Threshold
SKAL - Vario Sink Alarm
INTG - Vario integration time
FRE - Vario base frequency
INCR - Vario Increments
DAMP - Vario Damper
CADE - Vario Cadence
BUZZ - Vario buzzer level
CTRS - Display contrast ratio
ATSL - Auto-silent on/off
UNIT - Units
DATE - Date
TIME - Time
REST - Restore to factory defaults