Flyingvoice P11 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 49

background image

Flyingvoice Network Technology Co., Ltd. III/V

and Flyingvoice does not provide any warranty and is subject to change without notice. All
risks other than risks caused by use of the information are borne by the recipient. In no event,
even if Flyingvoice has been suggested the occurrence of damages that are direct,
consequential, incidental, special, punitive or whatsoever (Including but not limited to loss of
business profit, business interruption or loss of business information), shall not be liable for
these damages.

End User License Agreement

This End User License Agreement ("EULA") is a legal agreement between you and Flyingvoice.
By installing, copying or otherwise using the Products, you: (1) agree to be bounded by the
terms of this EULA, (2) you are the owner or an authorized user of the device, and (3) you
represent and warrant that you have the right, authority and capacity to enter into this
agreement and to abide by all its terms and conditions, just as if you had signed it. The EULA
for this product is available on the Flyingvoice Support page for the product.

Patent Information

China, the United States, EU (European Union) and other countries are protecting one or more
patents of accompanying products and/or patents being applied by Flyingvoice.

Technical Support

Visit www.flyingvoice.com for product documents and FAQ, or contact Flyingvoice by email

at [email protected]. We’ll get you the help you need.

Declaration of Conformity

Part 15 FCC Rules

This device complies with Part 15 of the FCC Rules. Operation is subject to the following three
conditions:

•

This device may not cause harmful interference

•

This device must accept any interference received, including interference that may cause

undesired operation.

•

The distance between user and products should be no less than 20cm

Note: This equipment has been tested and found to comply with the limits of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

«
1
2
3
4
5
...
»

Содержание P11


















































Отзывы:

Нет отзывов

Похожие инструкции для P11

Бренд: Panasonic Страницы: 4

Yealink SIP-T22P

Бренд: Yealink Страницы: 4

Yealink SIP-T22P

Бренд: Yealink Страницы: 2

Бренд: Yealink Страницы: 12

Бренд: Yealink Страницы: 8

Yealink SIP-T21P

Бренд: Yealink Страницы: 144

Yealink SIP-T41P

Бренд: Yealink Страницы: 178

Бренд: MTT Страницы: 34

Бренд: Snom Страницы: 103

Бренд: Sony Ericsson Страницы: 99

Бренд: Avaya Страницы: 172

Бренд: Sony Ericsson Страницы: 40

Skyroute CL3050 ver 1.2

Бренд: DSC Страницы: 28

Бренд: N-Com Страницы: 32

Бренд: Pantech Страницы: 82

Бренд: Zte Страницы: 48

Бренд: Xiaomi Страницы: 8

Бренд: Billow Страницы: 131

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды