Getting Started with Your ATA
Flyingvoice Network Technology Co., Ltd. 8
OFF
Disconnected/Power off
LAN
ON(GREEN)
Connected (Data)
On Blinking (GREEN)
Connected (Registered)
OFF
Disconnected/Power off
FXO
ON(GREEN)
Connected (Registered)
On Blinking (GREEN)
Connected (Data)
OFF
Disconnected/Register fail
FXO
ON(GREEN)
Connected (Registered)
On Blinking (GREEN)
Connected (Data)
OFF
Disconnected/Register fail
Hardware Installation
Before configuring your ATA, please see the procedure below for instructions on
connecting the device in your network.
1.
Connect analog phone to FXO Port with a RJ11 cable.
2.
Connect the WAN port to your ISP
’
s ATA/switch with a RJ45 cable.
3.
Connect one end of the power cord to the power port of the device. Connect
the other end to the wall outlet.
4.
Check the device LED to confirm network connectivity.
Warning
Please do not attempt to unsupported power adapters and do not
remove power during configuring or updating the device. Using other
power adapters may damage the device and will void the manufacturer
warranty.