Flyingvoice FTA5111, Руководство пользователя

Страница: 46 / 83

Advanced Web Configuration
Flyingvoice Network Technology Co., Ltd. 44
Tone Region Used to match gateway ’ s tone region setting for DTMF CID detect
Ring Back Type Used to match gateway ’ s ring back type for DTMF CID detect
Impedance match FXO FXO impedance setting
FXO Use Callerid FXO CID enable/disable
FXO CH Cid Type FXO CID type setting: FSK or DTMF
FXO Minimum ring
voltage FXO ring voltage setting
FXO TX Vol FXO volume gain setting
FXO RX Vol FXO volume gain setting
DTMF CID LEVEL DTMF energy setting, when DTMF CID LEVEL > Silence_Threshold, device will
detect DTMF CID number
Silence_Threshold Device default energy setting
FXO Backup FXO backup setting, enable, FXO1 and FXO2 are backup for each other
Supplementary Services
Field Name Description
Auto Answer Sip-trunk Call Enable: support two-stage dialing users could call sip trunk number,
then dial out going number again.
Disable: doesn ’ t support two-stage dialing.
DTMF Sequence Generate FXO
HOOK FLASH
DTMF number which used to do HOOK FLASH.
Hook Flash Time FXO Within this time, if users press DTMF number, then device will hold the
call.
Collect Call Control FXO Block collect call, Collect call is a call that the user receiving this call
from PSTN line will pay for.
Block Collect Interval Time FXO Block collect call interval setting.
Call Route