Call Features
Flyingvoice Network Technology Co., Ltd. 22
Setting Up a Local Conference Call
You can set up a local conference call with up to two contacts.
Procedure
1. Place a call to the first party.
2. When the first party answers the call, select
Conference (Conf)
to place a new call.
The active call is placed on hold.
3.
Dial the second party’s number.
You can also select the desired contact from the search list, or select a contact from the placed
call list or Directory before you enter the number.
Holding or Resuming a Conference Call
When you place a conference call on hold, other participants cannot hear each other until
you resume the held conference call.
Procedure
1. Press the HOLD key or
Hold
to place the conference on hold.
2. Press the HOLD key again or
Resume
to resume the held conference call.
Splitting a Conference Call
You can split the conference call into individual calls. After the split, the conference call ends,
and other parties are held.
Procedure
1. Select
Split
.
Ending a Conference Call
When you end the conference call, the other parties drop the call.
However, the system administrator can set up your phone so that the other two parties remain
connected when you end the conference call.
Procedure
1. Select
End Call (EndCall)
.