Problem Solving Guidelines
Question
Reason
Treatment
Powered cannot
control
Severe shock
Aircraft from
total flying
to one side
Out of control
Cannot take
off
Landing too
fast
Remote control and aircraft
power supply bad.
The remote control and aircraft
to code without success.
Check and Charge the battery
according to battery installa-
tion instructions. The code the
aircraft.
Re-code according to the front
of the code description.
The rotor deformation.
Replace the new corresponding
rotor.
Hollow shaft bending.
The rotor deformation.
There is a motor damage.
The aircraft is not horizon-
tal when code.
Beyond the remote control
distance.
The rotor rotating speed is
too slow
Aircraft battery shortage
Quickly back to the throttle
lever
There are more than one
aircraft turn on the power
during binding.
The replacement of the new
rotor.
Replace the new corresponding
motor.
Push the One-key Calibration.
Control in the distance of
30m
Please re-code (It is neces-
sary to bind one by one.)
Will throttle control lever
slowly push up
Replace the full battery or
battery full of power Re-con-
trol
Let the aircraft fall, please
slowly pull back the throttle
control lever.
Replace the new hollow shaft.
