Flying Voice FTA1101, Руководство пользователя

Страница: 29 / 46

User Manual
25
Settings
Introduction
2). Carry Port Information: If or not carry Port information in
the SIP URI.
3) Signal Port: The local port of SIP protocol, default is 5060.
4) DTMF Type: choose the DTMF type from IN_band,
RFC2833 and SIP INFO.
5) RFC2833 Payload (>=96): User can use the default setting.
6) Register Refresh Interval (Second): The interval between
two normal Register messages. You can use the default setting.
7). RTP Port: FTA1101 will select idle port for RTP if you set
“0”, otherwise FTA1101 use the value you set. Generally
speaking, set “0”.
8) Cancel Message Enable: when you set enable, an
unregistered message will be sent before registration, while you
set disable, unregistered message will not be sent before
registration. You should set the option for different Proxy.
9) Session Refresh Time: Set the session refresh time.
10)Refresher: Select from UAC and UAS.
11)Prack Enable:If or not enable prack.
12)SIP Options Enable: If or not enable sip options.
13)Primary SER Detect Interval:Set the primary server detect
interval.
14)Max Detect Fail Count: The max detect fail account.
15)Keep-alive interval (10-60s): the interval that we send an
empty packet to Proxy.
16)Anonymous Call: If or not enable anonymous call.
17)Anonymous Call Block: If or not enable block anonymous
call function.
18)Proxy DNS Type: Select from A Type and DNS SRV.
19)Use OB Proxy In Dialog:If or not use OB proxy in dialog.
20)Reg Subscribe Enable:If or not enable registration
subscribe.
21)Dial Prefix: Define the prefix of the phone number you
dialed.
22)User Type:Define the user type, options are IP and Phone.
23)Only Recv Request From Server:If enable this option,
FTA1101 will only receive the call from the same SIP server.
24)Request URI user check:If or not enable request URI user
check.
25)Hold Method:Select the hold method, options are
ReINVITE and INFO.