Call Features
Flyingvoice Network Technology Co., Ltd.
20
Your system administrator can also set your phone to perform attended transfer when using
a Transfer key.
Performing an Attended Transfer
You can transfer a call to another contact after consulting with her/him.
Procedure
1. Press
Transfer (Trans)
during a call.
2. Do one of the following:
Enter the number or select a contact from the placed call list you want to transfer to.
Press
Directory (Dir)
. Select the desired contact from the Directory list.
3. Wait until the third party answers the call, press TRAN key to complete the transfer.
Conference Calls
The phone supports a three-way local conference and multi-way network conference.
During the conference, follow these tips:
Use the handset or a headset if you're in an open environment.
Mute your microphone when you are not speaking, especially in noisy environments.
Avoid tapping or rustling papers near the microphone.
Speak in your normal voice without shouting.
Note
Check with your system administrator to find out if the local conference is enabled on
your phone.
Topics
Setting Up a Local Conference Call
Holding or Resuming a Conference Call
Splitting a Conference Call
Ending a Conference Call
Setting Up a Local Conference Call
You can set up a local conference call with up to two contacts.
Procedure
1. Place a call to the first party.
2. When the first party answers the call, select
Conference (Conf)
to place a new call.
The active call is placed on hold.
3. Dial the second party’s number.
You can also select the desired contact from the search list, or select a contact from the
placed call list or Directory before you enter the number.
Holding or Resuming a Conference Call
When you place a conference call on hold, other participants cannot hear each other until
