FLYGT MAS 711, Инструкция по установке и эксплуатации

Страница: 96 / 150

Settings with the Web Tool, Set Up MAS Network Overview
Set Up MAS Network Overview
Instruction
MAS network overview displays key data and alarm status from other units connected to
the same network.
Follow these steps to set up the MAS network overview:
1. Click Setup – MAS network overview.
Result: The MAS Network overview is opened.
2.
• Select Active in the drop down menu to activate network data sharing.
• Enter the expected number of units on the network (enables this unit to detect when
other units on the network are down).
Comment: Sharing and receiving information via the MAS network overview
requires that the units are connected on the same side of any routers on the network.
3. Enter this unit’s assigned HTTP port in the router. When directly connected to the
LAN, not via Internet, this
fi
eld can be left blank.
Comment: To be able to follow a link from one unit to another when accessing the
MAS network from the Internet, a router with port forwarding must be used.
4.
• Enter the interval with which the data should be transferred and the network overview
reload time.
• Click Update to execute changes.
96