FLYGT Flygt 3069, Инструкция по установке, эксплуатации и обслуживанию

Страница: 19 / 64

4 Installation
4.1 Precautions
Before starting work, make sure that the safety instructions have been read and
understood.
DANGER: Electrical Hazard
Before starting work on the unit, make sure that the unit and the control panel are isolated
from the power supply and cannot be energized. This applies to the control circuit as well.
DANGER: Inhalation Hazard
Before entering the work area, make sure that the atmosphere contains sufficient oxygen
and no toxic gases.
4.1.1 Hazardous atmospheres
DANGER: Explosion/Fire Hazard
Special rules apply to installations in explosive or flammable atmospheres. Do not install
the product or any auxiliary equipment in an explosive zone unless it is rated explosion-
proof or intrinsically-safe. If the product is rated explosion-proof or intrinsically-safe, then
see the specific explosion-proof information in the safety chapter before taking any
further actions.
General requirements
These requirements apply:
• Use the pump dimensional drawing in order to ensure proper installation.
Before installing the pump, do the following:
• Provide a suitable barrier around the work area, for example, a guard rail.
• Make sure that equipment is in place so that the unit cannot roll or fall over during the
installation process.
• Check the explosion risk before you weld or use electric hand tools.
• Check that the cable and cable entry have not been damaged during transport.
• Always remove all debris and waste material from the sump, inlet piping, and
discharge connection, before you install the pump.
• Always check the impeller rotation before lowering the pump into the pumped liquid.
NOTICE:
Do not run the pump dry.
NOTICE:
Never force piping to make a connection with a pump.
Authority regulation
Vent the tank of a sewage station in accordance with local plumbing codes.
4 Installation
Flygt 3069 Installation, Operation, and Maintenance Manual 17