9
Bearing Maintenance:
If after some period of time the bearings stop running smoothly as
when new, you can oil it with light lubricating oil. We recommend using only a few drops,
anything more than a little will end up dripping from the bearing and onto the rest of your Arm.
Be sure to keep the oil away from your Camera, and clean up any over-spill when done.
Cleaning:
Do not use solvents or harsh cleaners of any kind on Vista-II Arm & Vest. If the unit
becomes dirty, use only a cloth or sponge with water and a very mild detergent to gently rub the
unit clean. Rinse well.
Storage:
If you are going to store Flycam Vista-II Arm & Vest for a long period of time, then we
recommend storing it up-right in a dry or low-to-normal humidity area.
If you are unable to find an environment like this, then we suggest you store the unit in an
airtight plastic container or bag. Keeping the unit upright helps to lessen stress on the system.
Maintenance
YOUR VISTA-II STABILIZING ARM & VEST
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OTPIONAL ACCESSORIES)
