4
For Interchanging the spring, Follow this video
https://bit.ly/34o0fgk
Bearing Maintenance
The Flycam GALAXY Arm contains the bearings. If after some period of time your bearings don’t turn
smoothly as when new, you can oil it lightly with light lubricating oil. We recommend that you use a
minimum amount. Only a few drops are required, plus anything more than a little will end up dripping
from the bearing and onto the rest of your Galaxy Arm. Be sure to keep the oil away from your Camera,
and clean up any over spill when done.
Cleaning
Do not use solvents or harsh cleaners of any kind on your Flycam Galaxy Arm & Vest. If the unit becomes
dirty, use only a cloth or sponge with water and a very mild detergent to gently rub the unit clean. Rinse
well.
Storage
If you are going to store your Flycam Galaxy Arm & Vest for a long period of time then please store the
unit up right in a dry or low to normal humidity area whenever possible.
If you are unable to find an environment like this, then we suggest you store the unit in an airtight plastic
container or bag. Standing the unit upright helps to alleviate stress on the system.
Maintenance
Position arm
Move the camcorder to your left so the arm crosses your body.
Adjust the arc of your arm so the rig feels comfortable to you.
Keep the camcorder close to your body.
YOUR FLYCAM GALAXY STEADYCAM ARM & VEST WITH HD-3000
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
