FLYCAM Handheld Video Stabilizer 3
H E A D A S S E M B L Y
Head Plate
Mid Plate
Bottom Plate
These three individual pieces are shipped as one assembled unit.
Note:
Included in the hardware package
are two different sized V-shaped
adaptors used to attach the camera to
the head plate. Choose the one that is
suitable for your camera. A locking pin
located at the front of the adaptor
prevents camera rotation on the head.
Head Plate
Bottom Plate
Mid Plate
‘ V ’ S H A P E D A D A P T O R S I N C L U D E D I N H A R D WA R E K I T
U N I C O Q U I C K R E L E A S E P L AT E A N D A D A P T R E R
C E N T R A L P O S T
Warning:
The Gimbaled control unit,
handle and yoke have been factory set
for optimum performance.
Do not attempt to adjust them.
Quick release
plate
Quick release
adapter
Lever to remove / attach
the quick release plate
Note:
If you have purchased Flycam-5000 (FLCM-5000-Q) then you will receive 4pc ‘V’ shaped
adaptors.
If you have purchased Flycam3000 (FLCM-3000-Q) then you will receive 2pc small ‘V’ shaped
adaptors.
