3
Detach the Placid from the Flowline Master
Get the spring off the camera hook with the
help of an Allen key.
Through the balance adjustment Knob, you
can adjust the balance anti-clockwise
according to the weight of your setup.
CAUTION:
Do not release the lever without
removing the setup. It may result in severe
damage to the camera.
Pull the camera hook cup through the cord
and remove the remaining cord from the
cup.
To remove the placid arm from its position,
unscrew one side of the safety elastic cord
from the plaid arm's knob. Then, pull the
other side of the elastic cord out from the
flowline support arm.
For Safety Belt
Attach one end of the safety belt with the
support jacket and make a knot with the
rest of the belt, as shown in the image. You
can attach this belt in many areas according
to your requirement.
Attach the other end to your camera for
more safety & protection.
