5
•
Remove the Allen bolt from the bottom of
the head, mid & the bottom plate by
loosening it using the Allen key.
•
Similarly, remove the second bolt of the plate
as well.
•
Tighten the plate using both the side knobs.
NOTE:
If you wish to by pass the quick release
plate, the camera
(Not Included)
can be directly
attached to the Head Plate by using following
assembly sequence (without quick release
plate).
Head Plate with Quick Release Adapter
•
Loosen and remove the Allen bolt on the
bottom of the quick release adapter and
attach the adapter to the head plate.
•
Properly re
-
tighten the bolts by matching the
center hole of the quick release adapter and
the top plate.
