FLYBOX
Omnia57-80 ALTI-VARIO
-
Installation and User Manual,
Safety Instructions and Warning Booklet
Rev. 2.0
®
20
Instrument settings
To do the calibration, confirm the “Adjust offset” function;
It will require a double confirmation to continue, now turn
the knob to set a reference value taken from a sample
altimeter and confirm it by pressing shortly the knob. The
new Offset is now set and a message will confirm it.
To exit without changing the offset, keep pressed the knob
for more than 3 sec.
Backlight:
set the backlight in “Manual” or “Automatic”
mode. Go to chapter
4.5
for a full description.
Firmware Upgrade:
enter to upgrade the firmware. Go to
chapter
5.1
for a full description.
Backup/Restore:
enter to save and load settings. Go to
chapter
5.2
for a full description.
Logger:
enable to save a flight session data. Go to chapter
5.3
for a full description.
About:
enter to see instrument information.
About Page Example
Содержание Omnia57 ALTI-VARIO
Страница 4: ...Examples of available screens ...
Страница 52: ......
