Fly Products FLASH CRUISER Скачать руководство пользователя | Manualshive

Страница: 21 / 23

background image

TRIKE FLASH CRUISER - USER MANUAL REL . 2.09-ENG

___________________________________________________________________________

©

Copyright by

FLY

Products

s.r.l.

Page

21

-

REAR WHEEL ARMS BOLTS

Check the wear and oxidation
conditions of the bolts of the
rear wheel arms, if they are
not in good condition, do not
hesitate, replace them
immediately!

CAUTION:

Bolts on the arm are free to
rotate like the bolts on the
sides of the wheel shafts.

- REAR WHEEL STEEL CABLES

Check the wear and the
oxidation conditions of the steel
cables of the rear wheels, if they
are not in good condition, do not
hesitate, replace them
immediately!
Check the integrity of the cables
near the joints by carefully
bending the cable to check the
broken wires.

-

LOOPS AND CARABINERS

Check wear conditions inside all loops and carabiners, if there are some worn or crack
beginnings, proceed immediately to replace!

-

HARNESS AND BELTS

Check wear conditions of the harness and all belts.

CLEANING

Clean the TRIKE FLASH CRUISER with clean water and mild soap. Dust and dirt can be
wiped off or removed with mild soap and water. Grease and oil can be removed with a
good water-based degreaser.

«
...
19
20
21
22
23
»

Содержание FLASH CRUISER
























Отзывы:

Нет отзывов

Похожие инструкции для FLASH CRUISER

Para-RC Cloud 1.5

Бренд: Hacker Motor Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды