Mounting of the Fly meter:
The display module
is normally situated on the dashboard of your machine.
Measurement module
is mounted in the engine compartment within the reach of all measuring
sensors.
WARNING !!!! Do not attach the module to the hot spots to prevent module
overheating.
For interconnection of these modules use a data cable which is supplied in the length according to
your needs.
Other connecting cables
:
- Temperature and fuel sensors connect to the fixed inputs
- Speed sensor connect to an appropriate input
- Minus of the battery connect the shortest way to the motor frame
- Plus of the battery can be connected
to the measuring or display module
. It depends on the
construction of your cabling. The device connects behind the main power switch; it means that
when you turn on the main power switch this measuring device will turn on too.
Do not connect the power into both modules simultaneously!!!
Pay close attention to attachment of both data and connecting cables and sensor cables to
avoid stress, disconnection and damage caused by vibration!!!
We recommend to use sensors of our company because if you use different
company’s
products pay close attention to the selection to avoid damage of the measuring devise.
If you do not use the fuel flow sensor from our company pay close attention to the selection. It
is possible to use sensor only with NPN or PNP output.
