LIGHT SKY
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
www.lightsky.com.cn
www.lightsky-china.com
3
2
. SAFETY INSTRUCTIONS
●
1.
In order to ensure the light could operate normally, the ambient
temperature couldn't be higher than 38
℃
and no lower than- 2
℃
.
●
2.
Under normal condition, the highest sectional surface temperature
may be up to 60
℃
.
●
3.These projectors are designed depends on the electric shock
protection, the projector should be connected with the power supply
system which connected ground enough. The projector's ground
cable should be connected with the ground cable of the power
supply system as well. The ground mark of the light metal cover
should be connecting with the installation bricked steadily.
●
4. Don't use the power cable when the insulation is damaged.
It must be the manufacturer or distributor or the professional person
to change the damaged power cable in order to avoid any
dangerous.
●
5.Please check the voltage, frequency data of power supply system is
suitable for the mentioned on the projector. Please do avoid the
different voltage between them and burn the projector.
●
6.Do not attempt to operate this fixture if the power cord has become
damaged or frayed.
●
7.Never open this fixture while in use.
●
8.Never look directly into the light source. You risk injury to your
retina, which may induce blindness.
●
9.Please be aware that damages caused by modifications to the device
are not subject to warranty.
Notice:
To guarantee proper and consistent operation, it is
important to follow the guidelines in this manual. Our
company will not accept responsibility for damages
resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.
