154.321UK User Manual
9CH – 9 channels
Channel
Value
Function
Channel 1
000 - 255
Master dimmer 0-100%
Channel 2
000 - 255
Strobe, speed 0-100%
Channel 3
000 - 255
Red dimmer 0-100%
Channel 4
000 - 255
Green dimmer 0-100%
Channel 5
000 - 255
Blue dimmer 0-100%
Channel 6
000 - 255
White dimmer 0-100%
Channel 7
000 - 255
Amber dimmer 0-100%
Channel 8
000 - 255
UV dimmer 0-100%
Channel 9
000 - 004
N/A
005 - 080
Static colour selection
081 - 150
Colour jump, speed increase with value
151 - 220
Colour scroll, speed increase with value
221 - 255
Sound to light chase
Specifications:
Power
100-240Vac, 50/60Hz
DMX channels
2, 3, 4, 5, 6, 9
Fuse
F3A
LED lifespan
50,000 hours
Total luminous flux
3982lm
Operating temp
-20°C to +45°C
Luminous efficacy
23.5lm/W
Luminance : red
1300Lux @1m
Power consumption
169W
Luminance : green
2100Lux @1m
LED qty
9
Luminance : blue
2200Lux @1m
LED power
18W
Luminance : white
3200Lux @1m
LED colour
6-in-1 HEX (red, green,
blue, UV, amber & white)
Luminance : amber
1100Lux @1m
Beam angle
25º
Luminance : UV
1000Lux @1m
Housing material
Aluminium
Luminance : full on
8300Lux @1m
Projection distance
10m
IP rating
IP65
Housing colour
Black
Dimensions
235 x 265 x 210mm
DMX connection
Red: DMX+, White: DMX-, Braid:
ground
Weight
4.3kg
Troubleshooting:
No power
(mains)
Check mains wiring is correctly to mains in connection
Check mains outlet and consumer unit is switched on
No LED
display
Press any control panel button and check LED setting in menu
No light
output
Check control panel mode settings ensure dimming is not set to minimum
Check DMX settings from controller (dimmer levels, blackout etc.)
No strobe
output
Check strobe settings on control panel or from DMX controller
Unresponsive
to DMX
Check DMX connection/joints to ensure dmx + and – not shorted and ground is continuous to eliminate interference
Check that DMX mode is enabled (set “Addr” on control panel)
Check dmx lead and connector is in good workable condition
Overheating/
cutting out
Ensure that the unit is not too close to a heat source
Ensure that adequate airflow is afforded for cooling
Ensure alien object and dirt is not built up between heat sink fins
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2014. AVSL Group Ltd
.