fluxia DLB100, Руководство пользователя

Страница: 3 / 8

154.291UK User Manual
Panel layout
1. IEC mains inlet and fuse
2. Control panel and display
3. DMX IN connector (XLRM)
4. DMX OUT connector (XLRF)
5. IEC mains daisy-chain outlet
Control panel & display
UP Press to step up through menu options
DOWN Press to step down through menu options
+ Press to increase value
- Press to decrease value
Setting up
Connect the IEC inlet (1) of the DLB100 to mains power using the IEC mains lead provided.
Power for additional DLB100 bars can be daisy-chained via IEC outlets (5) for up to 30 units.
Connect DMX from a controller or previous lighting fixture to the DMX IN XLR connector (3)
Connect DMX on to further units from the DMX OUT XLR connector (4)
Depending upon the position of the DLB100, the best effect can be achieved by aiming the
beam across a flat surface, such as a wall or ceiling. Adjust the tilt accordingly for best results.
The DLB100 can operate via various DMX modes or from internal programs. Using the control
panel and display, step through the menu pages for the desired settings and adjust values to
suit. This process is shown in detail on the next page.
When not in use for long periods, disconnect the DLB100 from the mains supply.