4
Instruction Manual (PN: 5780D00)
Version Date: November 15, 2021
Safety Precautions
•
The Fluxergy Analyzer contains no user-serviceable components. DO NOT disassemble.
•
Never attempt to repair or adjust the Analyzer yourself. Unauthorized disassembly and repair could
result in electrical hazards. Only a qualified Fluxergy technician can service the Analyzer. Contact
Fluxergy Customer Support if the Analyzer fails to operate properly.
•
Contact Fluxergy Customer Support for any service issues.
•
DO NOT stack other equipment or containers on top of the analyzer.
•
Keep analyzer away from sources of excessive heat or flames.
•
PROTECT your equipment from damp conditions or wet weather.
•
DO NOT spill water or other fluids on the analyzer.
•
DO NOT use any of the following liquids, abrasives, or aerosol sprays on or near the analyzer, as
they may damage the outer case and may influence test results:
•
Organic solvents
•
Ammonia-based cleaners
•
Sprays containing volatile liquids
•
Insecticides
•
Disinfectants (Outer case of device can be gently wiped down with 70% isopropyl alcohol if
contaminated)
•
Air fresheners
•
The Power input supply for the Fluxergy Analyzer is 12VDC, 7A. Be sure to plug all equipment into
properly grounded electrical outlets.
•
Use only the power supply provided. Failure to do so may cause damage to the device and/or bodily
harm.
•
Disconnect the power cable from the AC power outlet:
•
If the power cable becomes frayed, split or otherwise damaged.
•
If anything is spilled onto the equipment.
•
If your equipment is exposed to excessive moisture.
•
If your equipment is dropped or the case has been damaged.
•
If you suspect that your analyzer needs service or repair.
•
Whenever you clean the case.
•
DO NOT use Fluxergy equipment in a manner not approved by Fluxergy.
•
Clean the exterior of Analyzer before and after each use to prevent contamination and ensure
trouble-free operation. Use a soft lint-free cloth and 70% isopropyl alcohol solution.
