Flux FMC 100, Оригинальное руководство по эксплуатации

Страница: 16 / 60

16 / 60 Operating Instructions FMC
ENGLI
SH
1 General Information
1.1 Scope of delivery
Please check the delivery according to the delivery note.
Also check the delivery for completeness and integrity.
Do not operate damaged devices.
These operating instructions and corresponding attachments with additional information
on the supplied components are part of the delivery scope.
1.2 Liability, warranty and guarantee
Upon acceptance of the product, the operating company accepts operation
responsibility.
The warranty period is 12 months from the date of delivery.
According to our general terms and conditions of sale, this warranty shall only apply
provided that:

the product has been used for its intended use and in accordance with the present
operating instructions.

assembly, commissioning and operation have been carried out in a professional
and appropriate manner.

repair has only been performed by authorised and qualified persons.

only genuine spare parts have been used.
The safety instructions highlighted in these operating instructions and in the corre-
sponding attachments must always be observed. We will not accept liability for any
damages or failures due to non-compliance with these operating instructions.
This manufacturer warranty is void for any damages and failures resulting from
unauthorised alterations or modifications of the product.
1.3 Further applicable documents
In addition to these operating instructions, you are provided with the following docu-
ments:

Attachments with additional information in accordance with the components
supplied. The documents are contained in the product-specific attachments.

Resistance chart (on request).
1.4 Storing operating instructions
These operating instructions with the related attachments must be available to the
operator at all times.
1.5 Markers
These markers will help you to understand the operating instructions.
For your orientation, the following formatting is used:

Listings of a descriptive nature are marked with the symbol "

" at the beginning
of the line.

Instructions are marked with the symbol ">" at the beginning of the line.
1.6 Safety instructions
The safety instructions are summarised in section 2. The safety instructions important
for the respective chapter are listed in the individual chapters and the attachments.
> Take a few moments to learn about the meaning of the safety signs used
(section 2.1 and 2.2).