![Flux beamo Скачать руководство пользователя страница 67](http://html1.mh-extra.com/html/flux/beamo/beamo_user-manual_2310925067.webp)
67
3. Release the 4 hex socket head screws with a 2.5mm
Allen key.
4. Move the laser head forward or backward related to
the rail. Then tighten the 4 screws back.
5. Press "Laser Pulse" and check if the dot landed on
the vertical center line of the ring. If not, repeat the
Step 3 and 4.
6. Check if the dot overlaps or is above the horizontal
center line of the ring. If yes, move on to "Third
Mirror Adjustment".
▲
above center
▲
below center
7. If the dot is below the center line, adjust the screws
of the laser tube holder. Release the holder on the
laser beam outlet side and tighten the other side.
▲
tighten
▲
loosen