Flusurfer Speed 3, Руководство пользователя

Страница: 7 / 26

10 11
3. 1. 2. Changing Bar width
The INFINITY BAR offers three different bar widths as options. Factory-ready, all kites are
adjusted with the optimal bar width. If you still want to change the setup, please use the fol-
lowing procedure.
In order to adjust the bar width, push up the floaters on the leader lines. Underneath the-
re is the end of the line piece for the three adjustment positions. The other end is counter-
sunk into the winder.In series, two of the three positions can be used by simply pulling the
line piece though.
Here are the different options:
Naturally you can combine according to your prefe-
rence. In this position (plastic ball outside and knot in
the middle) you can quickly readjust from the maximal
width to the middle position.
With this setup, the innermost and middle position can
be used together.
The feed-through on the inner side should (if need be) be
pierced with a sharp object (screwdriver).
If you only want to use the middle position, the connec-
tion part can be led from below to the winder.
The INFINITY BAR is available in two different lengths: 50cm and 60cm with the respective
width adjustment in 5cm steps:
50 cm INFINITY BAR: 40 cm >> 45 cm >> 50 cm
60 cm INFINITY BAR: 50 cm >> 55 cm >> 60 cm
3. 1. 3. assembly of the Depower loop
The Depower Loop of the INFINITY BAR is very easy to put together after release.
Pay attention that the Quick
Release is always sand free!
Simply bend the opened loop up-
wards with one hand and at the
same time, pull the release sleeve
upwards with the other hand.