Y1586
Instruction Sheet
3
Install a Dual Rack-Mount Kit
To install a Dual Kit, see Figure 3:
1. Place both Products side-by-side on a flat surface
and use three #8-32 x ½-inch panhead screws to
install the Rack Bracket to the outer left and right
sides of the Product. Refer to step 1 under
Install
a Single Rack-Mount Kit
.
2. Attach the Inner Rack Bracket to the inner right
and left sides of both Products with six #8-32 x ½-
inch panhead screws.
3. Attach the Inner Rack Bracket to the inner right
and left sides of both Products with six #8-32 x ½-
inch panhead screws and insert the two guide
pins into the two holes in both sides of the Inner
Rack Bracket.
4. Align the front tabs of the Inner Rack Brackets,
and fasten a Rack Screw Plate to the front tabs of
with two #8-32 x ½-inch panhead screws.
5. Install the entire assembly from the rear of the
rack, aligning the holes of the Rack Bracket to the
inside of the rack frame. At the front of the rack,
use six panhead hex screws (M6) to fasten the
Rack Faceplate and Rack Screw Plate through
the rack and Rack Brackets.
Rack Screw Plate
Rack Screw Plate
Rack Screw Plate
M6, Panhead,
Hex Screw
#
8 - 32 x 1/2"
,
Panhead, Hex
Screw
#8 - 32 x 1/2"
,
Panhead Screw
#
8 - 32 x 1/2"
, panhead screw
Inner Rack Bracket
Rack_2
Rack Bracket
#8 - 32 x 1/2"
,
Panhead Screw
1
2
2
3
4
hum103.eps
Figure 3. Dual Rack Mount-Kit