Fluke TS 1200, Руководство пользователя

Страница: 32 / 44

3-4
TS1200 Test Set
Users Guide
3 Using a flat-blade screwdriver, loosen the four battery door screws; then remove the battery
door.
Note
Battery door screws are captive.
4 Remove the old batteries and dispose of them properly.
5 If replacing NiMH batteries with alkaline batteries, first pull the movable wall out of its slot
(see Figure 3-1) and move the wall forward to the first slot. Make sure the wall fits correctly
into the slot. Be careful not to break the leads of the white cable ribbon behind the wall.
6 Insert 4 new NiMH or 4 alkaline batteries, placing them so that their positive contacts point
towards the plus (+) symbol in the case. Reversing one or more batteries can create a
charging circuit for the other batteries, which may result in leakage or explosion.
7 Place the battery door on the test set and fasten the four screws securely.
bdx05.eps
Figure 3-1. Removing the Movable Wall