Fluke TP1000 Скачать руководство пользователя страница 1

TP1000

Test Probe with Remote Test Button

Safety Information

Warning

 identifies hazardous conditions and procedures that 

are dangerous to the user. A 

Caution

 identifies conditions and 

procedures that can cause damage to the Product or the 

equipment under test.

XW

 Warning

To prevent possible electrical shock, fire, or personal 

injury:

Read all safety information before you use the 

Product.

Use the Product only as specified, or the protection 

supplied by the Product can be compromised.

Comply with local and national safety codes. Use 

personal protective equipment (approved rubber 

gloves, face protection, and flame-resistant clothes) 

to prevent shock and arc blast injury where hazardous 

live conductors are exposed.

PN 5339312 (English)

8/2022 

©2022 Fluke Corporation. All rights reserved. Specifications are 

subject to change without notice. All Product names are trademarks of 

their respective companies.

1.888.610.7664 

[email protected]

Fluke-Direct

.com

Содержание TP1000

Страница 1: ... the Product Use the Product only as specified or the protection supplied by the Product can be compromised Comply with local and national safety codes Use personal protective equipment approved rubber gloves face protection and flame resistant clothes to prevent shock and arc blast injury where hazardous live conductors are exposed PN 5339312 English 8 2022 2022 Fluke Corporation All rights reser...

Страница 2: ...obe Do not use in CAT III or CAT IV environments without the protective cap installed on test probe The protective cap decreases the exposed probe metal to 4 mm This decreases the possibility of arc flash from short circuits 1000 V CAT II without protective cap installed 1000 V CAT III 600 V CAT IV with protective cap installed Do not use a shrouded banana jack accessory such as an alligator clip ...

Страница 3: ...est and measuring circuits connected directly to utilization points socket outlets and similar points of the low voltage MAINS installation Measurement Category III is applicable to test and measuring circuits connected to the distribution part of the building s low voltage MAINS installation Measurement Category IV is applicable to test and measuring circuits connected at the source of the buildi...

Страница 4: ... authorized service center to obtain return authorization information then send the product to that Service Center with a description of the problem THIS WARRANTY IS YOUR ONLY REMEDY NO OTHER WARRANTIES SUCH AS FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSED OR IMPLIED FLUKE IS NOT LIABLE FOR ANY SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES ARISING FROM ANY CAUSE OR THEORY Since s...

Отзывы: